XC899D series carving, milling, drilling and tapping multi-functional CNC system

1.1 System Overview
XC899D carving, milling, drilling and tapping multi-functional CNC system is a new generation of CNC system developed by our company. Support carving, milling, drilling, tapping processing. It adopts 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, full linkage, high-speed small line segment foresight algorithm. 0.001mm interpolation accuracy, maximum speed 30 m/min. It is the best choice for engraving machine, machining center, drilling and tapping center, CNC milling machine and CNC drilling machine.
XC899D numerical control system hardware and software features:
★ Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, maximum speed of 30 m/min, support direction + pulse and orthogonal pulse.
★ 8.4 inch color widescreen LCD, resolution 800×600, Windows interface style. Equipped with 8 soft function keys, easy to operate and learn. Provide parameter classification, alarm log, system diagnosis and other rich display interface, convenient debugging and maintenance.
★ International standard G instruction, compatible with FANUC system instruction.
★40 kinds of G instructions, support drilling cycle, tapping cycle.
★ Support RS485 absolute value servo.
★ Parts program full screen editing, built-in 500M massive program space, can store N parts program.
★ With USB interface, support U disk file read and write, data backup.
★ Input 24(expandable to 96) points, output 24(expandable to 96) points (custom), flexible and convenient.
★ Chinese and English operation interface, complete help information, more convenient operation.
★ The system adopts acceleration and deceleration control before interpolation.
★ Support knife length and radius knife repair.
★ Support hand wheel test processing, convenient program debugging.
★ Support multi-level operation rights, convenient device management, with a limited time system lock function.
★ Support UG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wenthai and other third-party software G code files.
★ Support self-programming knife library, flexible use of a variety of knife libraries.

1.2 Technical Specifications
Basic function
Control axis 3~6 axes (X, Y, Z, A, B, C)
The number of linkage axes is fully interconnected
Knife library support, need to edit knife library code
Spindle 2 analog spindles, of which spindle 1 can be digital spindles (occupy a digital shaft)
Spindle monitor
Minimum instruction unit 0.001 mm
Maximum instruction value ±99999999 x minimum instruction unit
Fast feed speed 30000 mm/min
Fast feed rate F0, 25%, 50%, 75%,100%
Pulse mode 1: Direction + pulse 2: orthogonal pulse (if the driver supports, recommended, stronger anti-jamming, higher moderation) 3: dual pulse, compatible with older stepper drives
Maximum frequency 100Khz,250Khz,500KHz can be set. (500KHz only orthogonal output pulse)
Feed speed ratio 0 ~ 150%
Electronic gear ratio 1 ~ 65,55:1 ~ 65,535
Automatic acceleration and deceleration
The high-speed small line segment foresight algorithm has
Hand wheel test processing has
Positioning G00 (linear interpolation positioning)
Interpolation line (G01), arc (G02/G03/G12), helix interpolation
Return to Reference Point Automatic Return to Reference Point (G28)
LCD 8.4-inch TFT LCD screen, resolution 800×600
MDI software keys 8
Step x1, x10, x100
Communication port USB flash drive port
External handwheel interface is available
I/O interface 24/24(expandable to 96/96)
Pause (seconds) Yes
Quasi-stop state Yes
quasi-stationary
Storage trip check yes
MDI operation has, support multi-stage operation
reset
The jump switch is available
Single segment run has
Program protection switches are available
Self-diagnosis function is available
Emergency shutdown
Single-phase AC220V+10%-15%, 50Hz±1Hz
Coordinate system Machine coordinate system (G53), workpiece coordinate system (G92, G54 ~ G59), local coordinate system (G52), coordinate system plane specified
Automatic coordinate system Settings have
The decimal point input has
Auxiliary function
Auxiliary function M2 number, M code custom, manual /MDI/ automatic control spindle forward, reverse, stop; Control coolant start and stop; Control lubrication start and stop, etc
Spindle function
Spindle Function Dual spindle (single digital spindle)
Digital spindle Spindle 1 supports, occupies one digital axis (Z-axis is not supported), the speed is more stable.
Tapping support
Spindle analog output has, dual spindle
Tool function
Tool function support automatic tool change, support the center of the knife, three points to set the center of the knife
Tool compensation memory -9999.999 ~ 9999.999, 99 pieces
Tool compensation tool long tool and radius tool
Edit operation
Edit function parameters, diagnostic input by bit, program editing, MDI multi-program segment execution
Storage capacity 500M
Number of stored programs 500
Program name display Chinese, English, numbers, combinations
Line lookup has
Skip any optional program segment there
Program switch yes
reveal
Show Chinese, English
Processing time and number of parts are displayed
Spindle speed, M/S instruction has
Host size (mm)
Overall dimensions (height × width × thickness) 400×265×80
Opening size (H x W) 388 x 248