XC899T series multi-functional lathe numerical control system

1.1 System Overview
XC899T multifunctional lathe numerical control system is a new generation numerical control system developed by our company. It adopts 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, full linkage, high-speed small line segment foresight algorithm. 0.001mm interpolation accuracy, maximum speed 30 m/min.
XC899T numerical control system hardware and software features:
★ Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, maximum speed of 30 m/min, support direction + pulse and orthogonal pulse.
★ 8.4 inch color widescreen LCD, resolution 800×600, Windows interface style. Equipped with 8 soft function keys, easy to operate and learn. Provide parameter classification, alarm log, system diagnosis and other rich display interface, convenient debugging and maintenance.
★ International standard G instruction, compatible with FANUC system instruction.
★ Support RS485 absolute value servo.
★ Parts program full screen editing, built-in 500M massive program space, can store 500 parts program.
★ With USB interface, support U disk file read and write, data backup.
★ Input 24(expandable to 96) points, output 24(expandable to 96) points (custom), flexible and convenient.
★ Chinese/English operation interface, complete help information, more convenient operation.
★ Support knife length and radius knife repair.
★ Support hand wheel test processing, convenient program debugging.
★ Support multi-level operation rights, convenient device management, with a limited time system lock function.
★ Support UG, Mastercam, PowerMill, FeatureCAM and other third-party software G code files.
★ Support self-programming tool library, flexible use of a variety of tool libraries, can use servo tower.
★ Dual spindle, support spindle 2 and spindle 1 synchronization to achieve flying tool cutting (double servo spindle required).
★ Dual spindle positioning function, can achieve double-head processing.
★ Can run a feed program synchronously to achieve efficient processing.
★ Support side drilling and tapping, spindle 2 position interpolation and tapping.

1.2 Technical Specifications
Basic function
Number of control axes 2~6 axes (X, Y, Z, A, B, C)
The number of linkage axes is fully interconnected
Knife library support, need to edit knife library code
Minimum instruction unit 0.001 mm
Maximum instruction value ±99999999 x minimum instruction unit
Fast feed speed 30000 mm/min
The cutting feed mode is divided into each feed and transferred to each feed
Fast feed rate F0, 25%, 50%, 75%,100%
Pulse mode 1: Direction + pulse 2: orthogonal pulse (if the driver supports, recommended, stronger anti-jamming) 3: dual pulse, compatible with old stepper drives
Maximum frequency 100Khz,250Khz,500KHz can be set. (500KHz only orthogonal output pulse)
Feed speed ratio 0 ~ 150%
Electronic gear ratio 1 ~ 65,55:1 ~ 65,535
Constant linear velocity has
The high-speed small line segment foresight algorithm has
Hand wheel test processing has
Positioning G00 (linear interpolation positioning)
Interpolation line (G01), arc (G02/G03/G12), helix interpolation
Return to Reference Point Automatic Return to Reference Point (G28)
LCD 8.4-inch TFT LCD with 800X600 resolution
MDI software keys 8
Step x1, x10, x100
Communication port USB flash drive port
External handwheel interface is available
I/O interface 24/24(expandable to 96/96)
Pause (seconds) Yes
Quasi-stop state Yes
quasi-stationary
Storage trip check yes
MDI operation has, support multi-stage operation
reset
The jump switch is available
Single segment run has
Program protection switches are available
Self-diagnosis function is available
Emergency shutdown
Single-phase AC220V+10%-15%, 50Hz±1Hz
Coordinate system Machine coordinate system (G53), workpiece coordinate system (G92, G54 ~ G59), local coordinate system (G52), coordinate system plane specified
Automatic coordinate system Settings have
The decimal point input has
Assist the ability
Auxiliary function M2 number, M code custom, manual /MDI/ automatic control spindle forward, reverse, stop; Control coolant start and stop; Control lubrication start and stop, etc
Main axis energy
Spindle function Dual spindle: analog, 485 communication mode (more stable than analog), servo pulse mode can be
Digital spindle support, double digital spindle support flying tool cutting function
Tapping thread support, spindle 2 supports only interpolation tapping. Support spindle 1 interpolation threading.
Spindle analog output, double spindle 0~10V
The skill of the knife
Tool function supports automatic tool change.
Tool compensation memory -9999.999 ~ 9999.999, 16 pieces
Tool compensation XZ tool long tool repair, radius tool repair
Compilation operation
Edit function parameters, diagnostic input by bit, program editing, MDI multi-program segment execution
Storage capacity 500M
Number of stored programs 500
Program name display Chinese, English, numbers, combinations
Line lookup has
Skip any optional program segment there
Program switch yes
display
Show Chinese, English
Processing time and number of parts are displayed
Spindle speed, M/S instruction has
Inch (mm)
Overall dimensions (height × width × thickness) 400×265×80
Opening size (H x W) 388 x 248